Hi Shaun,
Did you got any solution for this problem ,
I am getting the smilar issue.
I am running the job to import Transport of Copies. but ToC is not getting Imported . I run the job multiple times but no luck .
Thanks
Pramod
↧
Re: Project Status Switches and transport import errors
↧
Re: LAPI_DatabaseOutsideDiscovery,other data supplier is not available
Hi Aditya,
Have you checked the below SAP Note and Troubleshooting guide attached to it ?
1842956 - Check Data Supplier Completeness for Technical System
Hope this helps.
Thanks & Regards,
Nisha
↧
↧
Re: JVM in SolMan
Hi Sachin!
We are running the AS's in Unix.
Through MMC If I open up the Solution Manager tree, it shows the SDM / dispatcher / server0 running.
But when I enter Tx SM52, it displays the message 'VMC is not loaded'. So maybe I'm doing something wrong?
Thanks!
↧
Re: STMS Issue In ChaRM
Hello Pramod,
Did you check the authorization trace on your managed systems. Check on the user which is used for the read user (for example SM_**CLNT**_READ). Use also in solar_project_admin the Refresh button in the Change Management part.
It is possible that the user have not enough authorization (Object S_TRANSPRT, value 03 and object S_SYS_RWBO, domain ' , DESTSYS:P*, Activity 03)
The need for this authorization is introduced with note 2053197.
Best regards,
Richard Veldhuis
↧
Re: Is there any specific template for sap business one blueprint in solman?
Hi, Ajith.
You can change document templates in solar_project_admin:
BR,
Artem
↧
↧
Re: Is there any specific template for sap business one blueprint in solman?
Hi, Artem
Is there any excel template present where we can import/export business blueprint for sap business one..
↧
Re: Solution manager configuration error
Hi,
Seems the webservice activation for the smdagent was not completed correctly.
Please check sap note 1659135.
If this does not help please check if your LM-SERVICE is deployed correctly, and also if the IS-AGENT is on the correct version.
Go over on note 2018474 as well, checking the permission of the files on OS.
Do you use the correct user to configure?
SOLMAN_ADMIN for configuration, SMD_ADMIN for agent connection is suggested, are the roles correctly generated? Did you perform SCC7 after the copy?
Authorizations need be correct on both.
ps: if this does not help could you double check 1663549:
Go to transaction SOAMANAGER.
check definition of the Consumer Proxy: CO_DIA.
CO_DIAG_WILY_WS_MANAGED_SETUP/LP_WS_MANAGED_SETUP.
if no user credentials maintained under tab 'Security', please delete the entry and run again: solman_setup -> System Preparation / Configure Connectivity / Activate Web Services.
BR,
Krisztian
↧
Re: Cannot read HTTP connection LMDB_SyncDest1
I found the solution:
1. create RFC as written in note 1994138
2. go back to Set Up LMDB >> try to add connection.. >> error: asks to create another RFC LMDB_SyncDest2
3. create RFC LMDB_SyncDest2
4. go back to Set Up LMDB >> now the connection can be added
this was tricky
Thx for your help
↧
Business Process Monitoring Setup Guides
Hello Experts,
I have to perform Business Process Monitoring for Batch Job Monitoring KPI and I have started with solution creation. As i am not aware about step by step procedure and if any activities required through SOLMAN_SETUP, can anyone guide me with this.
Regards,
Omkar Kuldharan
↧
↧
Re: Business Process Monitoring Setup Guides
Hi Omkar, You can find the necessary information related to Implementing/setup BPM in below link. http://wiki.scn.sap.com/wiki/display/SM/Business+Process+Monitoring Regards, Jaskirat Singh
↧
MFMon - Unable to subscribe message flow group
Hello together,
we want to use the message flow monitoring.
We connected the PO System and some Business System through the managed
system setup of the solution Manager. Also we completed the technical monitoring steps.
We setup the Integration Visibility Steps in the PO System and run the discovery and all the other steps which are described as prerequisites. When we created a message flow group (with two flows) and we want to subscribe we get several erros.
On the top of the window we get the following error messages:
- You have to define a technical system
- There has been an execption
.....
And if you click on the details of the error there is the following error message:
"Web-Service-Error during Subscribtion"
The SLG1Log for E2E_EXCMGT/SETUP says the following:
"No input provided"
Please help me to find the error....
BR
Tobias
↧
Re: Business Process Monitoring Setup Guides
Hello Jaskirat,
I went through link that you have provided. I am sure this will help me a lot while setup.
Thanks a ton for help.
Regards,
Omkar Kuldharan
↧
Re: Business Process Monitoring Setup Guides
Hi Omkar,
If it is only for jobs then you might try Unified Job Monitoring where within solman_setup->Technical Monitoring-> job and BI Monitoring wizard
you can easily configure all the managed system jobs very easily without any creation of a solution etc.
check below for unified job monitoring( Solman 7.1 SP10 onwards)
How to Setup the Unified Job Monitoring in SAP Solution Manager 7.1?
Job_Monitoring_Wiki - Technical Operations - SCN Wiki
Hope this helps further.
Thanks
Prakhar
↧
↧
Re: Transactions tested in a frame of time (Test Workbench)
Hello Rishav, thanks for your answer, the customer requirement is very specific, they want to see all the transactions tested in all the test cases and know the transaction status (error, ok, etc), they want to generate a report about it, it is possible?
↧
Re: MFMon - Unable to subscribe message flow group
Hi Tobias,
Check your SLD for the Business Systems involved. A technical system should be available.
Also, make sure to include undetermined flows when you maintain flow groups.
Kind regards,
Dimitri
↧
Re: MFMon - Unable to subscribe message flow group
Hi Dimitri,
thanks for your answer.
The technical system is assigned to the involved business System in the SLD and vice versa.
I'm a little bit confused about your 2nd point. How can I include unterminede flows in a flow group? I thought I can't see undetermined flows in the setup of MFmon...
Thanks
↧
Re: STMS Issue In ChaRM
Hi Anand,
Thank you for the rply ,
I checked
1. STMS is configured properly , All TMS rfc are working fine in all system , Consolidation route is provide from source to first target system.
2. Logical component is fine .execution check is green in manage system configuration .
every thing seems fine . dont know why this Project track error is comming .
Thanks
Pramod
↧
↧
Re: STMS Issue In ChaRM
Hi Veldhuis,
THank you for reply ,
I gave sap_all to user SM_<sid> user which is used for read rfc and also for SMTM<SID> User.
But still no luck
Thanks
Pramod
↧
" Procedure to Disable Approval Determination Blog in CHARM"
Hi Experts,
I need an help, I am in middle of CHARM Implementation, My Client requirement is, He does not want to approve the documents in "Approval Determination Block, Instated they will approve Via Action Statuses.
Can you please let me know, what is the Proper Procedure to Disable Approval Determination Block from SMCR (Request for Change).
Any Pointers to resolve this will be highly appreciated".
Regards
Faraz
↧
Re: " Procedure to Disable Approval Determination Blog in CHARM"
Hi, Faraz.
You can simply hide this assignment block:
P.S. Before it you should copy standard configuration for your Z* configuration key.
BR,
Artem
↧